Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CC Plate C - ENGINE (Carburettor Model): Crankshaft, Camshaft, Pistons and Flywheel
<< Return to Triumph Catalogue Plate List
Also in this listing
Crankshaft, Chainwheel, Fan Assembly, Extension, Flywheel Assembly, Camshaft, Timing Cover Assembly, Piston Assembly, Drive Shaft Assembly - Distributor And Oil Pump| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
C1 | 307546 |
CRANKSHAFTTriumph Catalogue Remarks: Fitted up to Engine No. CC/CP50,000 |
1 | ||
|
C1 | 311322 |
CRANKSHAFTTriumph Catalogue Remarks: Fitted from Engine No. CC/CP50,001 |
1 |
£796.45 Ex VAT @ 20% |
|
|
C1A | 149748 |
PLUG, oilway, crankshaft |
6 |
£1.56 Ex VAT @ 20% |
|
|
C1B | 118632 |
PLUG, screwed, crankshaft |
6 |
£4.84 Ex VAT @ 20% |
|
|
C2 | 149082 |
BEARING, main standardTriumph Catalogue Remarks: Alternative to 149550 Main bearings are available in the following undersizes. |
8 halves | ||
|
C2A | 149082/10 |
BEARING, main -0.010" |
8 halves | ||
|
C2B | 149082/20 |
BEARING, main -0.020" |
8 halves | ||
|
C2C | 149082/30 |
BEARING, main -0.030"Revington TR information: |
8 halves | ||
|
C2D | 149082/40 |
BEARING, main -0.040"Revington TR information: |
8 halves | ||
|
C2E | 149550 |
BEARING, mainTriumph Catalogue Remarks: Alternative to 149082 |
8 halves | ||
|
C3 | 144195 |
WASHER THRUST Standard |
1 | ||
|
C3A | AEW2182005 |
WASHER THRUST +0.005"Revington TR information: TR7 Thrust Washer set of 2 pieces 0.005" oversize. |
1 | ||
|
C3B | AEW2182010 |
WASHER THRUST +0.010"Revington TR information: TR7 Thrust Washer set of 2 pieces 0.010" oversize. No longer available |
1 | ||
|
C4 | 145864 |
CHAINWHEEL (for duplex chain) |
1 |
£65.32 Ex VAT @ 20% |
|
|
C5 | 145275 |
SHIM, chainwheel to crankshaft -.004" |
A/R |
£1.73 Ex VAT @ 20% |
|
|
C6 | 145276 |
SHIM, chainwheel to crankshaft - .006" |
A/R |
£2.11 Ex VAT @ 20% |
|
|
C7 | 133234 |
KEY, locating chainwheel on crankshaft |
1 |
£13.90 Ex VAT @ 20% |
|
|
C8 | 119390 |
DEFLECTOR, oil |
1 |
£16.07 Ex VAT @ 20% |
|
|
C9 | 133235 |
SLEEVE, oil seal |
1 |
£35.77 Ex VAT @ 20% |
|
|
C10 | 214479 |
PULLEY AND DAMPER assembly 3/8" grooveTriumph Catalogue Remarks: All markets except USA |
1 |
£164.22 Ex VAT @ 20% |
|
|
C10A | 217371 |
PULLEY AND DAMPER assembly 1/2" grooveTriumph Catalogue Remarks: USA markets only |
1 | ||
|
C11 | DP0508 |
DOWEL, locating adaptor on pulley and damper |
2 | ||
|
C12 | 148832 |
BOLT, securing adaptor and pulley to crankshaftRevington TR information: TR250, 5 and 6 extensions 148831 are 84mm long with no register and use bolt 148832 which is 103mm long (measured from under the head). Consider second hand part 148832SH |
1 |
£23.22 Ex VAT @ 20% |
|
 |
C13 | 047246 |
BUSH, constant pinion shaftTriumph Catalogue Remarks: Fitted up to Engine No. CC50,000 |
1 |
£10.61 Ex VAT @ 20% |
|
 |
C13A | 151213 |
BUSH, constant pinion shaftTriumph Catalogue Remarks: Fitted from Engine No. CC50,001 |
1 |
£7.30 Ex VAT @ 20% |
|
|
211986 |
FAN ASSEMBLYRevington TR information: Not available new. Use second hand part 211986SH |
1 | |||
|
C14 | 308353 |
FAN ASSEMBLY - 8 Blade (Plastic)Triumph Catalogue Remarks: Alt to 311686 All markets except USA |
1 |
£137.98 Ex VAT @ 20% |
|
|
C14A | 311868 |
FAN ASSEMBLY - 7 Blade (Plastic)Triumph Catalogue Remarks: USA type markets, Fitted up to Engine No. CC.75000 |
1 | ||
|
C14B | 312301 |
FAN ASSEMBLY - 13 Blade (Plastic)Triumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
1 |
£106.15 Ex VAT @ 20% |
|
|
C14C | 311868 |
FAN ASSEMBLY - 7 Blade (Plastic)Triumph Catalogue Remarks: Alt. to 308353 for all markets except USA |
1 | ||
|
C15 | 148831 |
EXTENSION, fanTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
1 | ||
 |
C16 | 108496 |
BUSH - Fan to extensionTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
8 |
£1.10 Ex VAT @ 20% |
|
|
C17 | 108499 |
SLEEVE - Fan to extensionTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
4 |
£1.73 Ex VAT @ 20% |
|
|
C18 | 108495 |
WASHER - Fan to extensionTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
4 |
£0.18 Ex VAT @ 20% |
|
|
C19 | HB0810 |
BOLT - Fan to extensionTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
4 | ||
|
C20 | 107857 |
WASHER, tab - Fan to extensionTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
2 |
£3.48 Ex VAT @ 20% |
|
|
C20A | 157876 |
ADAPTOR, fan extentionTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
1 | ||
|
C20B | HU0813 |
BOLT, front adaptor to fan extentionTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
4 | ||
|
C20C | WP0034 |
WASHER , plain, front adaptor to fan extentionTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
4 |
£0.10 Ex VAT @ 20% |
|
|
C20D | HU0810 |
BOLT, fan to front extentionTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
4 | ||
|
C20E | WP0034 |
WASHER, plain, fan to front adaptorTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
4 |
£0.10 Ex VAT @ 20% |
|
|
C21 | 214239 |
BELT, fan, heavy duty, for 15AC and 17AC alternator onlyTriumph Catalogue Remarks: Green stripe All markets except USA |
1 | ||
|
C21A | 214325 |
BELT, fan, extra heavy duty, for 11AC alternator onlyTriumph Catalogue Remarks: Blue and Yellow Stripe |
1 | ||
|
C21B | 217391 |
BELT, fanTriumph Catalogue Remarks: USA markets only |
1 |
£17.28 Ex VAT @ 20% |
|
|
C22 | 148041 |
FLYWHEEL ASSEMBLYTriumph Catalogue Remarks: Fitted up to Engine No. CC50,000 |
1 | ||
|
C22A | 151214 |
FLYWHEEL ASSEMBLYTriumph Catalogue Remarks: Fitted from Engine No. CC50,001 |
1 | ||
|
C23 | 201350 |
RING, gear, starterRevington TR information: 117 teeth shrink on. This is not a bolt on ring gear. |
1 |
£42.06 Ex VAT @ 20% |
|
|
C24 | 127883 |
DOWEL, flywheel to crankshaft |
1 | ||
|
C25 | 147299 |
BOLT, flywheel to crankshaft |
4 | ||
|
C26 | 307621 |
CAMSHAFTRevington TR information: TR250 Standard Camshaft To avoid excessive and premature cam lobe wear it is important to use valve springs, which provide the correct seat pressure. We recommend standard spring pressure, certainly no more unless you are consistently... READ MORE |
1 |
£329.80 Ex VAT @ 20% |
|
 |
C27 | 105114 |
PLATE, locating |
1 |
£32.05 Ex VAT @ 20% |
|
|
C27A | HU0807 |
SCREW, set - Front engine plate and locating plate to cylinder blockTriumph Catalogue Remarks: Also shown under front engine plate |
2 | ||
|
C27B | WL0208 |
WASHER, lock - Front engine plate and locating plate to cylinder blockTriumph Catalogue Remarks: Also shown under front engine plate |
2 | ||
|
C28 | 145865 |
CHAINWHEEL, camshaft |
1 |
£85.78 Ex VAT @ 20% |
|
|
C29 | 145870 |
CHAIN, timing (duplex) |
1 | ||
|
C30 | 036411 |
PLATE, locking - Chainwheel to camshaft |
1 |
£1.58 Ex VAT @ 20% |
|
|
C31 | 100500 |
SCREW, set - Chainwheel to camshaft |
2 |
£3.34 Ex VAT @ 20% |
|
|
C32 | 214678 |
TIMING COVER ASSEMBLYRevington TR information: No longer available Consider s/hand part 214678SH |
1 | ||
|
C33 | 125631 |
SEAL, oil, in timing coverTriumph Catalogue Remarks: Fitted up to CF.3531 |
1 | ||
|
C33 | 155695 |
SEAL, oil, in timing coverTriumph Catalogue Remarks: Fitted from CF.3532 |
1 | ||
|
C34 | 043752 |
PLATE, anchor, chain tensioner |
1 |
£13.28 Ex VAT @ 20% |
|
|
C35 | SP91B3 |
RIVET, anchor plate to timing cover |
2 | ||
|
C36 | 145866 |
TENSIONER, chainRevington TR information: Tensioner Timing Chain TR5-6 and 2.5Pi etc. Installation Tip:Timing chain tensioners can wear rapidly if not free to move. Check that the timing cover assembly part no. 214678 has no ridges inside, which could stop the... READ MORE |
1 |
£10.32 Ex VAT @ 20% |
|
|
C37 | 033214 |
PIN, anchor, chain tensioner |
1 |
£7.93 Ex VAT @ 20% |
|
|
C38 | PC0007 |
PIN, cotter - Chain tensioner attachment |
2 | ||
|
C39 | WP0018 |
WASHER, plain - Chain tensioner attachment |
2 |
£0.42 Ex VAT @ 20% |
|
 |
C40 | 211126 |
GASKET, timing cover |
1 |
£2.88 Ex VAT @ 20% |
|
|
C41 | HU0807 |
SCREW, set -Timing cover and front engine plate to cylinder block |
5 | ||
|
C42 | WL0208 |
WASHER, lock -Timing cover and front engine plate to cylinder block |
7 | ||
|
C43 | HN2008 |
NUT--Timing cover and front engine plate to cylinder block |
2 | ||
|
C44 | PT0803 |
SCREW, set - Timing cover to front engine plateRevington TR information: Not available use Stainless Steel version SN605031 |
5 | ||
|
C45 | WL0208 |
WASHER, lock -Timing cover to front engine plate |
5 | ||
|
C46 | 146454 |
CONNECTING ROD ASSEMBLYRevington TR information: Connecting Rod forged from 42CrMo4 material suitable for Mk4/1500 Spitfire, TR250, 5, 6 and Triumph 2000/2500. We can also supply H beam type competition connecting rods as well as second hand original rods under part number... READ MORE |
6 |
£85.21 Ex VAT @ 20% |
|
|
C47 | 119813 |
BUSH, small end |
6 |
£3.83 Ex VAT @ 20% |
|
|
C48 | 107401 |
DOWEL, hollow, connecting rod bolt |
12 |
£5.22 Ex VAT @ 20% |
|
|
C49 | 138529 |
BOLT, connecting rod |
12 | ||
|
C50 | 149081 |
BEARING, big end, Big end bearings are obtainable in the following undersizes:- .010" -.020" -.030"-.040". See below.Triumph Catalogue Remarks: Alt. to 149549 |
12 halves | ||
|
C50A | 149549 |
BEARING, big end, Big end bearings are obtainable in the following undersizes:- .010" -.020" -.030"-.040". See below.Triumph Catalogue Remarks: Alt. to 149081 |
12 halves | ||
|
C50B | 149081/10 |
BEARING, big end, undersizes:- .010" |
12 halves | ||
|
C50C | 149081/20 |
BEARING, big end, undersizes:- .020" |
12 halves | ||
|
C50D | 149081/30 |
BEARING, big end, undersizes:- .030" |
12 halves | ||
|
C50E | 149081/40 |
BEARING, big end, undersizes:- .040" |
12 halves | ||
|
C51 | 148118 |
PISTON ASSEMBLY (GRADED F, G & H) |
6 |
£258.76 Ex VAT @ 20% |
|
|
C52 | 147294 |
RING, compression, platedRevington TR information: Piston Rings are now sold as sets. See RA22626STD for standard, Oversize +0.020", 0.030", 0.040" and 0.060" are also available. The original individual part numbers 147293, 147294, 149052 and 149053 made up a set... READ MORE |
6 | ||
|
C53 | 147293 |
RING, compression, taperedRevington TR information: Piston Rings are now sold as sets. See RA22626STD for standard, Oversize +0.020", 0.030", 0.040" and 0.060" are also available. The original individual part numbers 147293, 147294, 149052 and 149053 made up a set... READ MORE |
6 | ||
|
C54 | 149052 |
RING, chrome rail -Scraper ringRevington TR information: Piston Rings are now sold as sets. See RA22626STD for standard, Oversize +0.020", 0.030", 0.040" and 0.060" are also available. The original individual part numbers 147293, 147294, 149052 and 149053 made up a set... READ MORE |
12 | ||
|
C55 | 149053 |
SPACER - Scraper ringRevington TR information: Piston Rings are now sold as sets. See RA22626STD for standard, Oversize +0.020", 0.030", 0.040" and 0.060" are also available. The original individual part numbers 147293, 147294, 149052 and 149053 made up a set... READ MORE |
6 | ||
|
C56 | 146485 |
PIN, gudgeon |
6 | ||
|
C57 | 508978 |
CIRCLIP, retaining gudgeon pin, Pistons are obtainable + .020" oversize. |
12 |
£0.73 Ex VAT @ 20% |
|
|
Piston rings are obtainable in the following oversizes:- + .010" + .020" + .030" Please quote Part No. and size required when ordering. |
|||||
|
C58 | 126786 |
DRIVE SHAFT ASSEMBLY, DISTRIBUTOR AND OIL PUMPRevington TR information: Oil pump and distributor drive shaft assembly. Not available new use 126786SH. |
1 | ||
|
C59 | 126785 |
GEAR, driving, distributor and oil pumpRevington TR information: Gear driving distributor. Not available new, order second hand assembly of gear ,shaft and pin, 126786SH. |
1 | ||
|
C60 | 149097-1 |
SHAFT, oil pump driveRevington TR information: Short Distributor and oil pump drive shaft for TR6 carb and TR250. RevingtonTR have had to invent this part number as all TR250 and TR6 parts books show the shaft with part number 126784 however... READ MORE |
1 | ||
|
C61 | 500974 |
PIN, Mills, securing gear to shaft |
1 |
£0.44 Ex VAT @ 20% |
|
 |
C62 | 126784 |
PEDESTAL, distributorRevington TR information: Distributor pedestal for Carburetor 6 cylinder cars. Not available new, please use second hand part 126784SH or aluminium part 126784ALLOY. Click more info to order second hand or Aluminium part. |
1 | ||
|
C63 | 104939 |
WASHER, pedestal |
2 |
£2.52 Ex VAT @ 20% |
|
|
C64 | HN2008 |
NUT - Pedestal to cylinder block |
2 | ||
|
C65 | WL0208 |
WASHER, lock - Pedestal to cylinder block |
2 | ||
|
C66 | HU0704 |
SCREW, set - Distributor to pedestal |
2 | ||
|
C67 | WL0207 |
WASHER, lock - Distributor to pedestal |
2 | ||
|
C68 | WP0035 |
WASHER, plain - Distributor to pedestalTriumph Catalogue Remarks: Note:- For Distributor details see Electrical section. |
2 |
Also in this listing
Crankshaft, Chainwheel, Fan Assembly, Extension, Flywheel Assembly, Camshaft, Timing Cover Assembly, Piston Assembly, Drive Shaft Assembly - Distributor And Oil Pump