Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CC Plate Y - CLUTCH: Clutch Assembly and Operation
<< Return to Triumph Catalogue Plate List
Also in this listing
Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
Y1AA | 214321 |
CLUTCH COVER ASSEMBLY BORG AND BECKThis item has been superceded by GCC228 - see below |
1 | ||
|
GCC228 |
CLUTCH COVER TR4A-7 BORG & BECKRevington TR information: Diaphragm Clutch Cover Standard specification. Whist this part is available new, Revington TR can also offer an exchange part GCC228EX which is remanufactured to the original specification. This cover can also be used in TR2-4 where... READ MORE |
1 |
£155.90 Ex VAT @ 20% |
||
|
Y1 | 515635 |
COVER AND STRAPS, sub assemblyRevington TR information: Not available. Use GCC228 |
1 | ||
|
Y2 | 517084 |
SPRING, diaphragm |
1 | ||
|
Y3 | 515638 |
RING, diaphragm spring fulcrum |
2 | ||
|
Y4 | 515634 |
RIVET, shouldered |
9 | ||
|
Y5 | Not serviced |
PLATE, pressure |
|||
|
Y6 | 515637 |
CLIP, retaining diaphragm spring on pressure plate |
3 | ||
|
Y7 | 514735 |
RIVET, clip and strap to pressure plate |
3 | ||
|
Not serviced |
RIVET, balance weight to cover |
||||
|
Not serviced |
WEIGHT, balance, clutch cover |
||||
|
Y8 | 148146 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: B & B clutch only |
1 | ||
|
GCP143 |
CLUTCH PLATE TR4A-6 B&BRevington TR information: Whist this Driven Plate is available new, Revington TR prefer due to varying quality of newly manufactured parts, often having fewer rivets holding them together than were present in the original equipment, to supply an... READ MORE |
1 |
£122.28 Ex VAT @ 20% |
||
|
Y8A | 517281 |
FACING, packageTriumph Catalogue Remarks: B & B clutch only |
1 | ||
|
215422 |
CLUTCH COVER ASSEMBLY LAYCOCKThis item has been superceded by GCC139 - see below |
1 | |||
|
GCC139 |
CLUTCH COVER ASSEMBLY LAYCOCK TR4A-6Revington TR information: This Laycock Diaphragm Clutch Cover assembly is not available new. For that reason we offer an exchange part GCC139EX which is remanufactured to the original specification. Note that Laycock clutch parts are very difficult to find... READ MORE |
1 | |||
|
Y9 | 517085 |
SPRING, diaphragm |
1 | ||
|
Y10 | 512343 |
RING, retaining |
1 | ||
|
Y11 | 512344 |
CLIP, spring, anti-rattle |
2 | ||
|
Y12 | Not serviced |
COVER, inner |
|||
|
Y13 | Not serviced |
COVER, outer |
|||
|
Y14 | Not serviced |
PLATE, pressure |
|||
|
Y14A | 156868 |
DRIVEN PLATETriumph Catalogue Remarks: Alternative to 148402 |
1 | ||
|
148402 |
DRIVEN PLATE ASSEMBLYRevington TR information: This Laycock Diaphragm Clutch Driven Plate is not available new. For that reason we offer an exchange part 148402EX which is remanufactured to the original specification. Note that Laycock clutch parts are very difficult to find... READ MORE |
1 | |||
|
Y15 | 148402 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: Laycock clutch only, alternative to 156868 |
1 | ||
|
Y16 | DP0411 |
DOWEL, locating clutch cover on flywheelThis item has been superceded by DP414 - see below |
3 | ||
|
DP414 |
DOWEL STOCK CUTTO FIT 1/4" |
3 |
£1.96 Ex VAT @ 20% |
||
|
Y17 | HU0856 |
SCREW, set, clutch cover to flywheelThis item has been superceded by SH505061 - see below |
6 | ||
|
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
6 |
£0.90 Ex VAT @ 20% |
||
|
Y18 | WL0208 |
WASHER, lock, on set screwThis item has been superceded by WS105090853 - see below |
6 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
||
|
Y19 | 142465 |
CLUTCH THROW-OUT BEARINGThis item has been superceded by GRB211HD - see below |
1 | ||
 |
GRB211HD |
BEARING CLUTCH RELEASE H/DUTYRevington TR information: TR4A-6 Release bearing, heavy duty. The introduction of this bearing has been prompted by the recent poor quality of the original style bearing. GRB211HD is a modern bearing which is much more reliable than the original... READ MORE |
1 |
£77.89 Ex VAT @ 20% |
||
|
Y19A | 148189 |
BEARING, needle roller, clutch throw-outTriumph Catalogue Remarks: Shown in the original catalogue, but not fitted to any TR4A-6. The release bearing is 142465 which supersedes to GRB211. |
1 | ||
|
Y20 | 147858 |
SLEEVE, clutch throw-outRevington TR information: RTR recommend 147858PB made from very high grade phosphor bronze, which has no small pin preventing rotation and as a result no grooves are made by the operating pins. The original TR4A part was made from... READ MORE |
1 | ||
|
147858SH |
CLUTCH SLEEVE Second Hand |
1 |
£33.67 Ex VAT @ 20% |
||
|
Y21 | 106022 |
CLUTCH OPERATING FORKRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
|
|
106022SH |
Second Hand FORK CLUTCH RELEASE TR2-6 |
1 |
£34.19 Ex VAT @ 20% |
||
|
Y22 | 100164 |
PIN, for fork |
2 |
£3.97 Ex VAT @ 20% |
|
|
Y23 | 056965 |
PIN, taper, fork to clutch shaftTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 | ||
|
158777HD |
PIN TAPER CLUTCH HEAVY DUTYRevington TR information: This is a hardened taper pin holding the fork to the cross shaft. This help overcome the frequent failure of this pin. Revington TR recommend drilling through the fork, through the shaft and out the other... READ MORE |
1 |
£17.27 Ex VAT @ 20% |
||
|
Y23A | 158777 |
PIN, taper, fork to clutch shaftTriumph Catalogue Remarks: Fitted from Engine No. ............ |
1 | ||
|
158777HD |
PIN TAPER CLUTCH HEAVY DUTYRevington TR information: This is a hardened taper pin holding the fork to the cross shaft. This help overcome the frequent failure of this pin. Revington TR recommend drilling through the fork, through the shaft and out the other... READ MORE |
1 |
£17.27 Ex VAT @ 20% |
||
|
Y24 | 030047 |
WIRE, locking taper pinThis item has been superceded by RTR5285-2M - see below |
1 | ||
|
RTR5285-2M
|
LOCKING WIRE 1.02mm/MRevington TR information: Locking wire stainless steel 1.02mm dia. per meter |
1 |
£1.45 Ex VAT @ 20% |
||
|
Y25 | 136354 |
CLUTCH OPERATING SHAFT ASSEMBLYRevington TR information: Consider second hand part 136354SH. TR 2, 3, 4 and 4A use a slightly different shaft 108887. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side... READ MORE |
1 |
£44.33 Ex VAT @ 20% |
|
|
136354SH |
Second Hand CLUTCH SHAFT TR5-TR6Revington TR information: Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side of the standard taper pin |
1 |
£42.10 Ex VAT @ 20% |
||
|
Y25A | 144578 |
SPRING, clutch shaftRevington TR information: This item has a secondhand part available - see below |
1 |
£6.68 Ex VAT @ 20% |
|
|
144578SH |
SPRING CLUTCH SHAFT TR5/6 SECOND HAND |
1 |
£3.10 Ex VAT @ 20% |
||
|
Y26 | 211060 |
CLUTCH SLAVE CYLINDER ASSEMBLY (1")This item has been superceded by UKC8677 - see below |
1 | ||
|
UKC8677 |
CLUTCH SLAVE CYLINDER TR250, 5, 6Revington TR information: Clutch slave cylinder TR250, 5 and 6. This part is 1" diameter. A repair kit is available part number GRK4007. GSY129 is a similar cylinder with a smaller bore.109746 is the TR2 part which can... READ MORE |
1 |
£43.90 Ex VAT @ 20% |
||
|
Not serviced |
BODY, slave cylinder |
1 | |||
|
Y27 | 513954 |
SPRING, returnThis item has been superceded by 606731 - see below |
1 | ||
|
606731 |
SPRING IN SLAVE CYL |
1 | |||
|
Y28 | 513952 |
CUP, filler |
1 | ||
|
Y29 | 513951 |
PISTON, slave cylinder |
1 | ||
|
Y29A | 513953 |
CUP, spreader |
1 | ||
|
Y30 | 513390 |
SERVICE KITThis item has been superceded by GRK4007Z - see below |
1 | ||
|
GRK4007Z |
SEALS SLAVE TR5/6 |
1 |
£8.86 Ex VAT @ 20% |
||
|
Y31 | 501207 |
SCREW, bleed |
1 |
£3.62 Ex VAT @ 20% |
|
|
Y31A | 513955 |
BOOT |
1 | ||
|
Y32 | 138572 |
ROD, push, assemblyRevington TR information: Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K or second hand part 138572SH. |
1 |
£23.57 Ex VAT @ 20% |
|
|
138572SH |
Second Hand PUSH RODRevington TR information: Second Hand Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K |
1 |
£11.60 Ex VAT @ 20% |
||
|
Y33 | 136353 |
BRACKET, mountingRevington TR information: Not available new, use Second Hand part 136353SH. |
1 | ||
|
136353SH |
Second Hand PLATE CLUTCH SLAVE MOUNT TR5-6 |
1 |
£22.81 Ex VAT @ 20% |
||
|
Y34 | HB0813 |
BOLT - Mounting bracket to gearbox and rear engine plateThis item has been superceded by BH605131 - see below |
2 | ||
|
BH605131 |
BOLT 5/16 UNF X 1-5/8 INCH |
2 |
£1.21 Ex VAT @ 20% |
||
|
Y35 | HN2008 |
NUT - Mounting bracket to gearbox and rear engine plateThis item has been superceded by NP605081 - see below |
2 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
||
|
Y36 | WL0208 |
WASHER, lock -- Mounting bracket to gearbox and rear engine plateThis item has been superceded by WS105090853 - see below |
2 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
||
|
Y37 | HB0809 |
BOLT - Slave cylinder to mounting bracketThis item has been superceded by SH605091 - see below |
2 | ||
|
SH605091 |
SCREW 5/16 UNF X 1-1/8 INCH |
2 |
£1.22 Ex VAT @ 20% |
||
|
Y38 | HN2008 |
NUT - Slave cylinder to mounting bracketThis item has been superceded by NP605081 - see below |
2 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
||
|
Y39 | WL0208 |
WASHER, lock - Slave cylinder to mounting bracketThis item has been superceded by WS105090853 - see below |
2 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
||
|
Y40 | PJ8808 |
PIN, clevis - Slave cylinder push rod to clutch operating leverThis item has been superceded by PC1201771 - see below |
1 | ||
|
PC1201771 |
PIN CLEVIS 5/16 X 17/32 X 7/64 |
1 |
£1.55 Ex VAT @ 20% |
||
|
Y41 | WP0008 |
WASHER, plain - Slave cylinder push rod to clutch operating leverThis item has been superceded by WP10510075 - see below |
1 | ||
|
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
1 |
£0.44 Ex VAT @ 20% |
||
|
Y42 | PC0009 |
PIN, cotter - Slave cylinder push rod to clutch operating leverThis item has been superceded by PS106121 - see below |
1 | ||
|
PS106121 |
SPLIT PIN 3/32 X 1-1/2 INCH |
1 |
£0.26 Ex VAT @ 20% |
Also in this listing
Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")