Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CC Plate Y - CLUTCH: Clutch Assembly and Operation
<< Return to Triumph Catalogue Plate List
Also in this listing
Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
Y1AA | 214321 |
CLUTCH COVER ASSEMBLY BORG AND BECK |
1 | ||
|
Y1 | 515635 |
COVER AND STRAPS, sub assemblyRevington TR information: Not available. Use GCC228 |
1 | ||
|
Y2 | 517084 |
SPRING, diaphragm |
1 | ||
|
Y3 | 515638 |
RING, diaphragm spring fulcrum |
2 | ||
|
Y4 | 515634 |
RIVET, shouldered |
9 | ||
|
Y5 | Not serviced |
PLATE, pressure |
|||
|
Y6 | 515637 |
CLIP, retaining diaphragm spring on pressure plate |
3 | ||
|
Y7 | 514735 |
RIVET, clip and strap to pressure plate |
3 | ||
|
Not serviced |
RIVET, balance weight to cover |
||||
|
Not serviced |
WEIGHT, balance, clutch cover |
||||
|
Y8 | 148146 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: B & B clutch only |
1 | ||
|
Y8A | 517281 |
FACING, packageTriumph Catalogue Remarks: B & B clutch only |
1 | ||
|
215422 |
CLUTCH COVER ASSEMBLY LAYCOCK |
1 | |||
|
Y9 | 517085 |
SPRING, diaphragm |
1 | ||
|
Y10 | 512343 |
RING, retaining |
1 | ||
|
Y11 | 512344 |
CLIP, spring, anti-rattle |
2 | ||
|
Y12 | Not serviced |
COVER, inner |
|||
|
Y13 | Not serviced |
COVER, outer |
|||
|
Y14 | Not serviced |
PLATE, pressure |
|||
|
Y14A | 156868 |
DRIVEN PLATETriumph Catalogue Remarks: Alternative to 148402 |
1 | ||
|
Y15 | 148402 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: Laycock clutch only, alternative to 156868 |
1 | ||
|
Y16 | DP0411 |
DOWEL, locating clutch cover on flywheel |
3 | ||
|
Y17 | HU0856 |
SCREW, set, clutch cover to flywheel |
6 | ||
|
Y18 | WL0208 |
WASHER, lock, on set screw |
6 | ||
|
Y19 | 142465 |
CLUTCH THROW-OUT BEARING |
1 | ||
|
Y19A | 148189 |
BEARING, needle roller, clutch throw-outTriumph Catalogue Remarks: Shown in the original catalogue, but not fitted to any TR4A-6. The release bearing is 142465 which supersedes to GRB211. |
1 | ||
|
Y20 | 147858 |
SLEEVE, clutch throw-outRevington TR information: RTR recommend 147858PB made from very high grade phosphor bronze, which has no small pin preventing rotation and as a result no grooves are made by the operating pins. The original TR4A part was made from... READ MORE |
1 |
£29.09 Ex VAT @ 20% |
|
|
Y21 | 106022 |
CLUTCH OPERATING FORKRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
|
|
Y22 | 100164 |
PIN, for fork |
2 |
£3.97 Ex VAT @ 20% |
|
|
Y23 | 056965 |
PIN, taper, fork to clutch shaftTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 | ||
|
Y23A | 158777 |
PIN, taper, fork to clutch shaftTriumph Catalogue Remarks: Fitted from Engine No. ............ |
1 |
£16.08 Ex VAT @ 20% |
|
|
Y24 | 030047 |
WIRE, locking taper pin |
1 | ||
|
Y25 | 136354 |
CLUTCH OPERATING SHAFT ASSEMBLYRevington TR information: Consider second hand part 136354SH. TR 2, 3, 4 and 4A use a slightly different shaft 108887. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side... READ MORE |
1 |
£44.33 Ex VAT @ 20% |
|
|
Y25A | 144578 |
SPRING, clutch shaft |
1 |
£6.68 Ex VAT @ 20% |
|
|
Y26 | 211060 |
CLUTCH SLAVE CYLINDER ASSEMBLY (1") |
1 | ||
|
Not serviced |
BODY, slave cylinder |
1 | |||
|
Y27 | 513954 |
SPRING, return |
1 | ||
|
Y28 | 513952 |
CUP, filler |
1 | ||
|
Y29 | 513951 |
PISTON, slave cylinder |
1 | ||
|
Y29A | 513953 |
CUP, spreader |
1 | ||
|
Y30 | 513390 |
SERVICE KIT |
1 | ||
|
Y31 | 501207 |
SCREW, bleed |
1 |
£3.62 Ex VAT @ 20% |
|
|
Y31A | 513955 |
BOOT |
1 | ||
|
Y32 | 138572 |
ROD, push, assemblyRevington TR information: Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K or second hand part 138572SH. |
1 |
£23.57 Ex VAT @ 20% |
|
|
Y33 | 136353 |
BRACKET, mountingRevington TR information: Not available new, use Second Hand part 136353SH. |
1 | ||
|
Y34 | HB0813 |
BOLT - Mounting bracket to gearbox and rear engine plate |
2 |
£0.46 Ex VAT @ 20% |
|
|
Y35 | HN2008 |
NUT - Mounting bracket to gearbox and rear engine plate |
2 | ||
|
Y36 | WL0208 |
WASHER, lock -- Mounting bracket to gearbox and rear engine plate |
2 | ||
|
Y37 | HB0809 |
BOLT - Slave cylinder to mounting bracket |
2 | ||
|
Y38 | HN2008 |
NUT - Slave cylinder to mounting bracket |
2 | ||
|
Y39 | WL0208 |
WASHER, lock - Slave cylinder to mounting bracket |
2 | ||
|
Y40 | PJ8808 |
PIN, clevis - Slave cylinder push rod to clutch operating lever |
1 |
£1.96 Ex VAT @ 20% |
|
|
Y41 | WP0008 |
WASHER, plain - Slave cylinder push rod to clutch operating lever |
1 | ||
|
Y42 | PC0009 |
PIN, cotter - Slave cylinder push rod to clutch operating lever |
1 |
Also in this listing
Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")