Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » ENGINES and COMPONENTS » PUSH RODS

Engine, Transmission, wheels/Tyres and Heating/Cooling

PUSH RODS

Many gains in power and reliability in an engine can be achieved by careful building. When the rocker gear is installed, the rocker motion should result in the rocker being at 90° to the pedestal at half lift. To achieve this, the pedestal is either raised with shims, or the under-face machined off. This exercise will invariably result in the push rod ball pins being out of adjustment, requiring different length push rods. We therefore offer the push rods listed below to correct this situation. The push rods are measures in length overall. We appreciate that the correct way to measure would be from the centre of the ball end to the centre of the cup but as this is impractical an overall dimension gives an adequate indication of what will work in an individual application.

NOTE: For reference a TR250-6 Carb standard length is 211mm and TR5-6PI standard length is 206mm

7 results found.

< Back

Part No.	Description and Comments	Price	Add to Cart
RTR1191 CLICK FOR MORE INFO	PUSH ROD TUBULAR 198 MM TR5-6 Revington TR information: TR5-6 tubular push rod length 198mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE		No longer available
151073 CLICK FOR MORE INFO	PUSHROD T2000 8.0", 3.3" thick head Revington TR information: Push Rod 6 Cylinder engine, 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in TR 6 cylinder engines although longer... READ MORE		No longer available
151073SHK CLICK FOR MORE INFO	Second Hand PUSH ROD SET 12 Revington TR information: Push Rod 6 Cylinder engine, set of 12 Second Hand parts. 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in... READ MORE	£90.65 Ex VAT @ 20% £75.54	Available to order
RTR1192 CLICK FOR MORE INFO	PUSH ROD TR5-6 203MM Revington TR information: TR5-6 tubular push rod length 203mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE	£14.15 Ex VAT @ 20% £11.79	Available to order
RTR1193 CLICK FOR MORE INFO	PUSHROD 209.5mm (8.25")TR5-6 Revington TR information: TR5-6 tubular push rod length 209.5mm (8.25") NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used... READ MORE		No longer available
148916 CLICK FOR MORE INFO	PUSH ROD TR6 CR & TR250 TR6 CARB 8.3"(211mm) Revington TR information: Standard TR250, TR6carb and CRTR6 push rod. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE		No longer available
RTR1194 CLICK FOR MORE INFO	PUSHROD CHR-MOLY TR250, 5, 6 Revington TR information: TR5-6 Chrome Molybdenum Steel tube Push Rod for high stress applications. Priced each These push rods are 240mm long and are unfinished so that customers can cut them to the desired length. The lower ball pin... READ MORE		No longer available