Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » AXLES, DIFFERENTIALS & REAR HUBS » AXLES AND REAR HUBS » HUBS

Engine, Transmission, wheels/Tyres and Heating/Cooling

HUBS

Note 1:- See the section headed drive shafts for hubs sold as an assembly with drive shafts.
Note 2:- See SUSPENSION AND STEERING - Front suspension section for front hubs.

4 results found.

	Part No.	Description and Comments	Price	Add to Cart
	137496-1 CLICK FOR MORE INFO	REAR HUB ASSY. NEW UPRATED TR4A-6 Revington TR information: TR4A-6 new build uprated rear hub assembly with higher load capacity bearings than standard.These hub units are the ideal choice if a rear hub needs replacement especially as original parts become scarce rendering it difficult to... READ MORE	£895.16 Ex VAT @ 20% £745.97	Available to order
	137496EX CLICK FOR MORE INFO	HUB UNIT REAR TR4A-6 EXCHANGE Revington TR information: TR4A-6 rebuilt standard rear hub exchange. Consider new hub 137496-1 Triumphs original rear hub unit is a reliable design, with many many thousands built by Triumph and in service in a variety of climates and conditions... READ MORE	£451.20 Ex VAT @ 20% £376.00	Available to order
	RTR1343 CLICK FOR MORE INFO	HUB RACE RR TR4A-TR6 Revington TR information: TR4A-6 New rear hub unit. Based on Ford Sierra Cosworth hub, much stronger than original part. This unit is only necessary for extreme race or rally applications. This design of TR4A 6 rear hub unit is... READ MORE		No longer available
	211137 CLICK FOR MORE INFO	DRIVE FLANGE INNER TR5-6 Revington TR information: TR4A-6 drive flange for standard drive shafts.	£110.80 Ex VAT @ 20% £92.33	Available to order

4 results found.

17 plates in total

ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

PLATE N - ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

PLATE Q - ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

PLATE W - ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

PLATE P - ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

ENGINE (Petrol Injection Model): Alternator Mounting

PLATE X - ENGINE (Petrol Injection Model): Alternator Mounting

ENGINE (Petrol Injection Model): Closed Circuit Breather

PLATE T - ENGINE (Petrol Injection Model): Closed Circuit Breather

ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

PLATE R - ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

PLATE S - ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1

PLATE Y - CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")

GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

PLATE Z - GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

PLATE AA - GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

OVERDRIVE: 'A' Type: Kit

PLATE CA - OVERDRIVE: 'A' Type: Kit

OVERDRIVE: 'A' Type: Unit Assembly

PLATE CB - OVERDRIVE: 'A' Type: Unit Assembly

PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

PLATE AG - PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

PLATE AE - INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

RADIATOR Radiator Block Assembly, Overflow Bottle

PLATE AV - RADIATOR Radiator Block Assembly, Overflow Bottle

BODY AND FITTINGS: Heater Heater Details, Demister Outlet

PLATE BR - BODY AND FITTINGS: Heater Heater Details, Demister Outlet