Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
DIFFERENTIAL COMPONENT PARTS
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
RTR1479
|
CASING REAR DIFF TR5-6 FINNEDRevington TR information: TR5, TR250 and TR6 Aluminium differential casing, finned for better cooling. |
£510.56 Ex VAT @ 20% |
|
|
515709 |
CROWN WHEEL & PINION 4.875:1 TR6Revington TR information: CWP 4.875:1 ratio TR6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
||
|
516398 |
CWP 3.45:1 TR5-6Revington TR information: CWP 3.45:1 ratio TR5-6. This crown wheel and pinion set is suitable for TR2-6. When used with the appropriate bearings, it will fit TR2-4A live axle and TR4AIRS-6 differential unit. |
£473.26 Ex VAT @ 20% |
|
|
502127 |
CWP 3.7:1 TR2-6Revington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£529.28 Ex VAT @ 20% |
|
|
505014 |
CWP 4.1:1 TR4-6Revington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£403.88 Ex VAT @ 20% |
|
|
502523 |
CWP 4.3:1 TR6Revington TR information: CWP 4.3:1 ratio TR6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£471.30 Ex VAT @ 20% |
|
|
505013 |
CWP 4.55:1 TR2-6Revington TR information: TR2-6 Crown Wheel and Pinion set 4.55:1 ratio. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£474.31 Ex VAT @ 20% |
|
|
RTR1228
|
CWP 5.13:1 TR2-6Revington TR information: CWP 5.13:1 ratio TR2 6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
||
|
RTR1227
|
CWP 5.25:1 TR2-6Revington TR information: CWP 5.25:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
||
 |
RTR1278
|
CWP 6.67:1 TR2-6Revington TR information: CWP 6.67:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£599.59 Ex VAT @ 20% |
|
 |
140337 |
DIFF NOSE SEAL TR4A-6Revington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
£12.88 Ex VAT @ 20% |
|
|
056793 |
DIFF PINION THRUST 0.048 INCHThis item has been superceded by 139951 - see below |
||
|
139951 |
THRUST WASHER 51/53 THOURevington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|
|
RTR1229-1
|
DIFF REBUILD KIT TR4AIRS-6 STDRevington TR information: TR4AIRS-TR6 Kit of parts to rebuild differential. The kit includes all bearings, shims, seals and gaskets. For standard non LSD axles. |
||
|
211793EX |
PLATE MOUNT DIFF TR5/6 MODIFIEDRevington TR information: TR4A-6 Repaired and strengthened differential nose support plate. This plate can crack under stress from driving loads, usually aggravated by broken differential mountings in the chassis and worn rubber mountings. Our exchange units are strengthened to... READ MORE |
£192.85 Ex VAT @ 20% |
|
|
138441 |
SHIM 0.035"Revington TR information: Thrust Washer 0.035" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£5.28 Ex VAT @ 20% |
|
|
160375 |
THRUST 65-67 THOURevington TR information: Thrust Washer 0.065-67" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.01 Ex VAT @ 20% |
|
|
147249 |
THRUST WASHER 0.030 INCHRevington TR information: Thrust Washer 0.030" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£1.67 Ex VAT @ 20% |
|
|
139955 |
THRUST WASHER 0.068"Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|
|
139956 |
THRUST WASHER 0.072"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|
|
139951 |
THRUST WASHER 51/53 THOURevington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|
|
139953 |
THRUST WASHER 59/61 THOURevington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£11.57 Ex VAT @ 20% |
|
|
139954 |
THRUST WASHER 63/65 THOURevington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£15.88 Ex VAT @ 20% |
|
 |
138440 |
WASHER DIFF 0.027" thich TR2-6Revington TR information: Thrust Washer 0.027" ( 0.686mm) thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer... READ MORE |
£5.28 Ex VAT @ 20% |
|
|
148805 |
WASHER SHIM 0.041"Revington TR information: Thrust Washer 0.041" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£12.17 Ex VAT @ 20% |
