Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » ENGINES and COMPONENTS » CAMSHAFTS » STANDARD CAMSHAFTS

Engine, Transmission, wheels/Tyres and Heating/Cooling

STANDARD CAMSHAFTS

Standard 6 Cylinder Camshafts are detailed below along with their identification as there are many similar looking cams fitted to both 2 litre and 2.5 litre engines.

These are ordered under their original part numbers.

Part no.	Application	Inlet	Exhaust	Lift	Clearance	Identification
	2 Litre MK1	10-50	50-10	0.230"		Plain
	2 Litre MK2 & 2.5 Saloon.	24-64	64-24	0.230"		Groove
307621	TR250	10-50	50-10	0.215"	0.010"	1 narrow groove
307689	TR5-6 PI 'CP'	35-65	65-35	0.250"	0.010"	2 grooves
311399	TR6CF/CR	18-58	58-18	0.240"	0.010"	3 grooves

2 results found.

Part No.

Description and Comments

Price

Add to Cart

307621

CLICK FOR
MORE INFO

CAM TR250

Revington TR information: TR250 Standard Camshaft To avoid excessive and premature cam lobe wear it is important to use valve springs, which provide the correct seat pressure. We recommend standard spring pressure, certainly no more unless you are consistently... READ MORE

£329.80

Ex VAT @ 20%
£274.83

307689

CLICK FOR
MORE INFO

CAMSHAFT CP TR5/6 PI 150BHP.NEW

Revington TR information: TR5-6 PI 'CP' 35-65 65-35 0.250" 2 Rings To avoid excessive and premature cam lobe wear it is important to use valve springs that provide the correct seat pressure. We recommend standard spring pressure, certainly no... READ MORE

£500.94

Ex VAT @ 20%
£417.45

2 results found.

17 plates in total

ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

PLATE N - ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

PLATE Q - ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

PLATE W - ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

PLATE P - ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

ENGINE (Petrol Injection Model): Alternator Mounting

PLATE X - ENGINE (Petrol Injection Model): Alternator Mounting

ENGINE (Petrol Injection Model): Closed Circuit Breather

PLATE T - ENGINE (Petrol Injection Model): Closed Circuit Breather

ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

PLATE R - ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

PLATE S - ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1

PLATE Y - CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")

GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

PLATE Z - GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

PLATE AA - GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

OVERDRIVE: 'A' Type: Kit

PLATE CA - OVERDRIVE: 'A' Type: Kit

OVERDRIVE: 'A' Type: Unit Assembly

PLATE CB - OVERDRIVE: 'A' Type: Unit Assembly

PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

PLATE AG - PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

PLATE AE - INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

RADIATOR Radiator Block Assembly, Overflow Bottle

PLATE AV - RADIATOR Radiator Block Assembly, Overflow Bottle

BODY AND FITTINGS: Heater Heater Details, Demister Outlet

PLATE BR - BODY AND FITTINGS: Heater Heater Details, Demister Outlet