Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
PUSH RODS
Many gains in power and reliability in an engine can be achieved by careful building. When the rocker gear is installed, the rocker motion should result in the rocker being at 90° to the pedestal at half lift. To achieve this, the pedestal is either raised with shims, or the under-face machined off. This exercise will invariably result in the push rod ball pins being out of adjustment, requiring different length push rods. We therefore offer the push rods listed below to correct this situation. The push rods are measures in length overall. We appreciate that the correct way to measure would be from the centre of the ball end to the centre of the cup but as this is impractical an overall dimension gives an adequate indication of what will work in an individual application.NOTE: For reference a TR250-6 Carb standard length is 211mm and TR5-6PI standard length is 206mm
Part No. | Description and Comments | Price | Add to Cart | |
---|---|---|---|---|
![]() |
RTR1191 |
PUSH ROD TUBULAR 198 MM TR5-6Revington TR information: TR5-6 tubular push rod length 198mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE |
||
![]() |
151073 |
PUSHROD T2000 8.0", 3.3" thick headRevington TR information: Push Rod 6 Cylinder engine, 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in TR 6 cylinder engines although longer... READ MORE |
||
![]() |
151073SHK |
Second Hand PUSH ROD SET 12Revington TR information: Push Rod 6 Cylinder engine, set of 12 Second Hand parts. 203mm (8") long MkII Triumph 2000 with flat top pistons and 3.3" thick cylinder head. Only two lengths of push rod were used in... READ MORE |
£90.65 Ex VAT @ 20% |
|
![]() |
RTR1192 |
PUSH ROD TR5-6 203MMRevington TR information: TR5-6 tubular push rod length 203mm. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE |
£14.15 Ex VAT @ 20% |
|
![]() |
149513 |
PUSH ROD TR5/6 CP PI 8.11"Revington TR information: Standard TR5 CPTR6 push rod, 8.11" ( 206mm) long overall. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression and a... READ MORE |
£9.83 Ex VAT @ 20% |
|
![]() |
RTR1193 |
PUSHROD 209.5mm (8.25")TR5-6Revington TR information: TR5-6 tubular push rod length 209.5mm (8.25") NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used... READ MORE |
||
![]() |
148916 |
PUSH ROD TR6 CR & TR250 TR6 CARB 8.3"(211mm)Revington TR information: Standard TR250, TR6carb and CRTR6 push rod. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE |
£9.25 Ex VAT @ 20% |
|
![]() |
RTR1194 |
PUSHROD CHR-MOLY TR250, 5, 6Revington TR information: TR5-6 Chrome Molybdenum Steel tube Push Rod for high stress applications. Priced each These push rods are 240mm long and are unfinished so that customers can cut them to the desired length. The lower ball pin... READ MORE |