Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CP Plate N - ENGINE (Petrol Injection Model): Block and Sump
<< Return to Triumph Catalogue Plate ListAlso in this listing
Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure SwitchPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
N1AA | 516795 |
ENGINE UNIT 9.5 : 1 RatioTriumph Catalogue Remarks: Fitted up to Engine No. CP75,000 |
1 | |||
N1AB | 516795/R |
ENGINE UNIT 9.5 : 1 Ratio RECONDITIONED UNITTriumph Catalogue Remarks: Fitted up to Engine No. CP75,000 |
1 | |||
N1AC | Note:- The above units are less water pump, distributor, starter motor, alternator, oil filter, thermostat, inlet and exhaust manifolds and sparking plugs.Triumph Catalogue Remarks: Pretty obvious Hey! |
|||||
N1AD | 520854 |
ENGINE UNIT 9.5 : 1 RatioTriumph Catalogue Remarks: Fitted from Engine No. CP75,001 |
1 | |||
N1AE | 517278 |
DECARBONISING GASKET SETTriumph Catalogue Remarks: Fitted up to Engine No. ............ |
1 | |||
GEG179 |
GASKET SET HEAD TR5/6 PRE CP75001Revington TR information: Head gasket set for flat top TR5 and 6PI Engine Block (no recess) up to engine number CP75000. Also known as a Decarbonising Set The following head gasket and gasket set range fitted to TR250,... READ MORE |
1 |
£49.82 Ex VAT @ 20% |
|||
N1AF | 519956 |
DECARBONISING GASKET SETTriumph Catalogue Remarks: Fitted from Engine No. ............ up to CP75,000 |
1 | |||
GEG179 |
GASKET SET HEAD TR5/6 PRE CP75001Revington TR information: Head gasket set for flat top TR5 and 6PI Engine Block (no recess) up to engine number CP75000. Also known as a Decarbonising Set The following head gasket and gasket set range fitted to TR250,... READ MORE |
1 |
£49.82 Ex VAT @ 20% |
|||
N1AG | 520885 |
DECARBONISING GASKET SETTriumph Catalogue Remarks: Fitted from Engine No. CP75,001 |
1 | |||
AJM1193 |
GASKET SET HEAD TR6 LATERevington TR information: Head gasket set for recessed top TR5 and 6PI Engine Block from engine number CP75001. Also known as a Decarbonising Set The following head gasket and gasket set range fitted to TR250, 5 and 6 Up... READ MORE |
1 |
£60.20 Ex VAT @ 20% |
|||
N1AH | 517277 |
ENGINE GASKET SETThis item has been superceded by AJM214 - see below |
1 | |||
AJM214 |
GASKET SET BOTTOM END TR5-6. |
1 |
£36.02 Ex VAT @ 20% |
|||
N1 | 517611 |
CYLINDER BLOCKTriumph Catalogue Remarks: Fitted up to CC75,000 |
1 | |||
517611SH |
Second Hand BLOCKTriumph Catalogue Remarks: Fitted up to CC75,000 |
1 |
£422.16 Ex VAT @ 20% |
|||
N1A | UKC0902 |
CYLINDER BLOCKTriumph Catalogue Remarks: Fitted from Engine No. CP75,001 |
1 | |||
UKC0902SH |
Second hand BLOCKTriumph Catalogue Remarks: Fitted from Engine No. CP75,001 |
1 |
£362.94 Ex VAT @ 20% |
|||
N1B | CAP, bearing - Front and intermediateTriumph Catalogue Remarks: Not serviced |
|||||
N1C | CAP, bearing - RearTriumph Catalogue Remarks: Not serviced |
|||||
N2 | HB1024 |
BOLT - Caps to blockThis item has been superceded by BH607241 - see below |
8 | |||
BH607241 |
BOLT 7/16 UNF X 3 INCH |
8 |
£1.38 Ex VAT @ 20% |
|||
N3 | WL0210 |
WASHER, lock - Caps to blockThis item has been superceded by WS107121203 - see below |
8 | |||
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
8 |
£0.42 Ex VAT @ 20% |
|||
N4 | PS1103 |
PLUG, core, oil gallery, front |
1 |
£4.03 Ex VAT @ 20% |
||
N5 | 148353 |
PLUG, core, rear of camshaft |
1 |
£1.60 Ex VAT @ 20% |
||
N6 | 144688 |
PLUG, core, front face and R.H. side of block |
5 |
£2.20 Ex VAT @ 20% |
||
N7 | 144686 |
PLUG, core, rear face and L.H, side of block |
3 |
£3.71 Ex VAT @ 20% |
||
N8 | 144687 |
PLUG, core, front face of blockRevington TR information: This item has a secondhand part available - see below |
1 |
£3.67 Ex VAT @ 20% |
||
144687SH |
CORE PLUG TR5-6 CUP TYPE 1" SH |
1 |
£1.08 Ex VAT @ 20% |
|||
N9 | 118632 |
PLUG, dry seal, oil gallery, rearThis item has been superceded by 301815P - see below |
1 | |||
301815P |
PLUG CRANK SHAFT TR3-4A & 5-6Revington TR information: TR3-4A Plug shaft in crank. 1/2" long with a hex key slot. |
1 |
£2.58 Ex VAT @ 20% |
|||
N10 | PU1404 |
PLUG, oil galleryThis item has been superceded by 056765 - see below |
1 | |||
056765 |
PLUG BLANKNG OIL GALLERY TR2-6Revington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE |
1 |
£8.04 Ex VAT @ 20% |
|||
N11 | 118686 |
PLUG, oil gallery |
5 |
£4.31 Ex VAT @ 20% |
||
N11A | 116511 |
PLUG, oil gallery |
1 |
£6.49 Ex VAT @ 20% |
||
N12 | 149776 |
BUSH, oil pump drive shaftRevington TR information: This oil pump drive bush is fitted into the block of late TR5 models and all TR6. Early TR5's and all TR250 use bush part number 137978 which fits into a smaller bore in the engine... READ MORE |
1 |
£27.89 Ex VAT @ 20% |
||
N13 | DP0514 |
DOWEL, timing cover attachmentThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
N14 | DP0612 |
DOWEL, engine plate to gearboxThis item has been superceded by DP619 - see below |
2 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
2 |
£3.00 Ex VAT @ 20% |
|||
N15 | 143943 |
ADAPTOR, oil pressure gauge pipe |
1 |
£17.64 Ex VAT @ 20% |
||
N16 | 146200 |
STUD, cylinder head attachmentThis item has been superceded by 156274 - see below |
14 | |||
156274 |
CYL HEAD STUDRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
14 |
£12.71 Ex VAT @ 20% |
|||
N17 | 139836 |
STUD, gearbox and rear engine plate attachmentThis item has been superceded by ST605141 - see below |
3 | |||
ST605141 |
STUD 5/16 X 1-3/4" UNF+ UNF |
3 |
£3.46 Ex VAT @ 20% |
|||
N18 | 100433 |
STUD, timing cover and engine plate attachmentThis item has been superceded by ST605092 - see below |
2 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
|||
N19 | 101962 |
STUD distributor pedestal attachment frontThis item has been superceded by ST605101 - see below |
1 | |||
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
1 |
£3.04 Ex VAT @ 20% |
|||
N19A | ST605201 |
STUD distributor pedestal attachment rear |
1 | |||
N20 | 100433 |
STUD blanking plate attachmentThis item has been superceded by ST605092 - see below |
1 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
1 |
£2.66 Ex VAT @ 20% |
|||
N21 | 128773 |
STUD, engine mounting bracket and air manifold stay attachmentThis item has been superceded by ST606111 - see below |
2 | |||
ST606111 |
STUD 3/8 X 1-3/8" UNF+ UNF |
2 |
£1.55 Ex VAT @ 20% |
|||
N22 | 151134 |
BLOCK, sealing, frontRevington TR information: Sealing block to front engine plate TR250, 5 and 6. Also suitable for 6 cylinder saloon cars. This part is manufactured from aluminium and is prone to having the attachment screws pull the thread out of... READ MORE |
1 |
£53.98 Ex VAT @ 20% |
||
151134SH |
SEALER BLOCK |
1 |
£26.59 Ex VAT @ 20% |
|||
N23 | 150022 |
GASKET, sealing blockThis item has been superceded by UKC8321 - see below |
2 | |||
UKC8321 |
GASKET |
2 |
£0.65 Ex VAT @ 20% |
|||
N24 | PT0805 |
SCREW, set -Sealing block to front engine plateThis item has been superceded by SE605061 - see below |
2 | |||
SE605061 |
SCREW HINGE TO BODY |
2 |
£1.78 Ex VAT @ 20% |
|||
N25 | WL0208 |
WASHER, lock --Sealing block to front engine plateThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
N26 | 036234 |
PIECE, filling -Sealing block to cylinder block |
2 |
£2.57 Ex VAT @ 20% |
||
N27 | 100501 |
SCREW - Sealing block to cylinder blockThis item has been superceded by SW605081 - see below |
2 | |||
SW605081 |
SCREW(WAS 100501) |
2 |
£1.96 Ex VAT @ 20% |
|||
N28 | 146326 |
TAP, water drainRevington TR information: not avaialble new, use 129077, 602915A or 061478 |
1 | |||
N28A | 129077 |
PLUG, drainTriumph Catalogue Remarks: Fitted up to Engine No. ............ |
1 |
£16.91 Ex VAT @ 20% |
||
N29 | WF051 |
WASHER, fibre, water drain tapTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
N30 | WF0525 |
WASHER, fibre, water drain tapTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
N30A | WF0511 |
WASHER, fibreTriumph Catalogue Remarks: Fitted from Engine No. ............ |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
N31 | 147876 |
PLATE, blanking petrol pump apertureTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 |
£8.28 Ex VAT @ 20% |
||
147876SH |
BLANKING PLATE SECONH HANDTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 |
£10.06 Ex VAT @ 20% |
|||
N32 | 138791 |
GASKET -Blanking plate to block |
1 |
£1.08 Ex VAT @ 20% |
||
N33 | HN2008 |
NUT- Blankingplate to blockThis item has been superceded by NP605081 - see below |
2 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
|||
N34 | WL0208 |
WASHER, lock - Blanking plate to blockThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
N35 | 145021 |
CYLINDER LINERThis item has been superceded by 158942 - see below |
6 | |||
158942 |
CYLINDER LINER |
6 |
£32.44 Ex VAT @ 20% |
|||
N36 | 212622 |
REAR OIL SEAL HOUSINGTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 | |||
212622SH |
Second Hand REAR C/SHAFT SEAL CARRIERTriumph Catalogue Remarks: Fitted up to Engine No. ………… |
1 |
£38.27 Ex VAT @ 20% |
|||
N36A | 156530 |
REAR OIL SEAL HOUSINGTriumph Catalogue Remarks: Fitted from Engine No. ............ |
1 | |||
212622 |
REAR OIL SEAL HOUSINGRevington TR information: Not available new use 212622SH |
1 | ||||
N37 | 143456 |
SEAL, oil, crankshaft |
1 |
£6.25 Ex VAT @ 20% |
||
N38 | 105321 |
WASHER, joint Housing to cylinder block |
1 |
£0.98 Ex VAT @ 20% |
||
N39 | HB0809 |
BOLT - Housing to cylinder blockThis item has been superceded by SH605091 - see below |
7 | |||
SH605091 |
SCREW 5/16 UNF X 1-1/8 INCH |
7 |
£1.22 Ex VAT @ 20% |
|||
N40 | WL0208 |
WASHER, lock - Housing to cylinder blockThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
N40A | 500469 |
WASHER, copper - Housing to cylinder blockThis item has been superceded by WC10508038 - see below |
1 | |||
WC10508038 |
WASHER COPPER 5/16 I/D X 1/2 O/D X 0.040" |
1 | ||||
OIL PRESSURE ADJUSTMENT DETAILSTriumph Catalogue Remarks: CONSISTING OF ITEMS 41 TO 44 |
||||||
N41 | 132107 |
PISTON, relief valveRevington TR information: Piston. Oil pressure relive valve, TR250, 5, 6 and Triumph 2000 and 2.5PI etc. Original triumph parts were hardened to 40 Rockwell / 65 Vickers. There are many of these parts on the market that are... READ MORE |
1 |
£11.94 Ex VAT @ 20% |
||
N42 | 131535 |
SPRING, relief valve pistonRevington TR information: This item has a secondhand part available - see below |
1 |
£7.92 Ex VAT @ 20% |
||
131535SH |
Second Hand PRES. REL. SPRING OIL TR5-6 |
1 |
£3.79 Ex VAT @ 20% |
|||
N43 | 107246 |
PLUG, relief valveRevington TR information: Consider second hand part 107246SH. |
1 |
£21.97 Ex VAT @ 20% |
||
107246SH |
OIL PRV HOUSING Second Hand |
1 |
£16.85 Ex VAT @ 20% |
|||
N44 | 501258 |
WASHER, relief valve plugThis item has been superceded by 6K433 - see below |
1 | |||
6K433 |
WASHER CRUSH COPPER 5/8"Revington TR information: This part is a 5/8" washer. Some on the market under this number are 3/4". |
1 |
£3.11 Ex VAT @ 20% |
|||
N44A | 149634 |
OIL PUMP ASSEMBLYTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
N45 | 127732 |
BODY assembly, oil pumpTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
N45A | 104963 |
PLUG, core, oil pump bodyTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
N46 | 508975 |
ROTOR AND SPINDLE, assemblyTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
N47 | 214842 |
COVER, oil pump bodyTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
N48 | 149621 |
FILTER, oil pumpTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 |
£21.26 Ex VAT @ 20% |
||
N49 | HB0724 |
BOLT - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
2 | |||
BH604241 |
BOLT 1/4 UNF X 3 INCH |
2 |
£1.55 Ex VAT @ 20% |
|||
N50 | HB0727 |
BOLT - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
1 | |||
BH604261 |
BOLT 1/4 UNF X 3-1/4 INCH |
1 |
£0.74 Ex VAT @ 20% |
|||
N51 | WL0207 |
WASHER, lock - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CP53747 |
3 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
3 |
£0.20 Ex VAT @ 20% |
|||
N51A | 217488 |
OIL PUMP ASSEMBLYTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 | |||
N51B | 519569 |
OIL PUMP SPINDLE and outer rotor assembly (Matching Pair)Triumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 |
£37.96 Ex VAT @ 20% |
||
N51C | 217486 |
BODY, oil pumpTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 | |||
N51D | 217487 |
COVER, oil pump bodyTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 | |||
N51E | 149621 |
FILTER, oil pumpTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 |
£21.26 Ex VAT @ 20% |
||
N51F | 155370 |
STRAINER AND SUCTION PIPE assemblyTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 |
£34.68 Ex VAT @ 20% |
||
N51G | HB0726 |
BOLT - Oil pump assembly to cylinder blockTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
3 | |||
BH604251 |
BOLT 1/4 UNF X 3-1/8 INCH |
3 |
£1.55 Ex VAT @ 20% |
|||
N51H | 155371 |
NUT, suction pipe and strainer to bodyTriumph Catalogue Remarks: Fitted from Engine No. CP53748 |
1 |
£1.56 Ex VAT @ 20% |
||
N52 | 307836 |
OIL SUMP ASSEMBLYThis item has been superceded by 307834 - see below |
1 | |||
307834 |
ENGINE SUMP TR5-6Revington TR information: Engine Sump TR250, 5, 6. No longer avaialble. Use second hand part 307834SH or aluminium part 307834ALI Two types of oil sump were fitted to TR250, 5 and 6. Part number 307834 and 307836 the difference... READ MORE |
1 | ||||
N53 | 114774 |
PLUG, oil drainRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
114774SH |
Second Hand DRAIN Plug ENG/AXLE SQ TR2-6Revington TR information: Second hand Plug. The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using... READ MORE |
1 |
£3.52 Ex VAT @ 20% |
|||
N54 | 211125 |
GASKET, between sump and blockThis item has been superceded by AJM515 - see below |
1 | |||
AJM515 |
GASKET SUMP TR 5, 250 & 6Revington TR information: Full bottom set is AJM214. |
1 |
£7.45 Ex VAT @ 20% |
|||
N55 | HU0805 |
SCREW, set - Oil sump to cylinder blockThis item has been superceded by SH605051 - see below |
23 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
23 |
£1.39 Ex VAT @ 20% |
|||
N56 | WL0208 |
WASHER, lock - Oil sump to cylinder blockThis item has been superceded by WS105090853 - see below |
23 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
23 |
£0.25 Ex VAT @ 20% |
|||
N57 | 147712 |
DIPSTICK ASSEMBLYRevington TR information: not available new use Second Hand part 147712SH |
1 | |||
147712SH |
Second Hand DIPSTICK TR6 |
1 |
£44.71 Ex VAT @ 20% |
|||
N58 | 032307 |
WASHER, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
||
N59 | 127652 |
TUBE, dipstickRevington TR information: Call for price and availability |
1 | |||
N60 | 215349 |
FRONT ENGINE PLATERevington TR information: not available new. Use Aluminium part 215349A or second hand please enquire |
1 | |||
N61 | 215350 |
WASHER, joint, front engine plate |
1 |
£2.05 Ex VAT @ 20% |
||
N62 | HU0806 |
SCREW, set - Front engine plate to cylinder blockThis item has been superceded by SH605061 - see below |
3 | |||
SH605061 |
SCREW 5/16 UNF X 3/4 INCH |
3 |
£0.54 Ex VAT @ 20% |
|||
N63 | WL0208 |
WASHER, lock -- Front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
N64 | HU0807 |
SCREW, set - Front engine plate and camshaft locating plate to cylinder blockThis item has been superceded by SH605071 - see below |
2 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
2 |
£0.61 Ex VAT @ 20% |
|||
N65 | WL0208 |
WASHER, lock - Front engine plate and camshaft locating plate to cylinder blockThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
N66 | HU0807 |
SCREW, set - Timing cover and front engine plate to cylinder blockThis item has been superceded by SH605071 - see below |
5 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
5 |
£0.61 Ex VAT @ 20% |
|||
N67 | WL0208 |
WASHER, lock -Timing cover and front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
N68 | HN2008 |
NUT - Timing cover and front engine plate to cylinder blockThis item has been superceded by NP605081 - see below |
2 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
|||
N69 | 145385 |
ENGINE MOUNTING BRACKET ASSY.Revington TR information: Our stock is genuine Stanpart. See also 145385SHand 145385SHPC |
2 |
£94.92 Ex VAT @ 20% |
||
145385SH |
Second Hand SUPPORT ENG MOUNT TR5-6 |
2 |
£47.47 Ex VAT @ 20% |
|||
N70 | HU0906 |
SCREW, set - Mounting bracket to cylinder blockTriumph Catalogue Remarks: Note:- For other fixings see Air Manifold Stay attachment |
6 | |||
SH606061 |
SCREW 3/8 UNF X 3/4 INCH |
6 |
£1.08 Ex VAT @ 20% |
|||
N71 | WL0209 |
WASHER, lock - Mounting bracket to cylinder blockThis item has been superceded by WS106111243 - see below |
6 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
6 |
£0.37 Ex VAT @ 20% |
|||
N72 | 132669 |
MOUNTING, flexibleRevington TR information: For a competition part with a harder rubber infill, order part number UKC8330 These parts have a metric thread and are therefore supplied with the correct nuts. |
2 |
£22.98 Ex VAT @ 20% |
||
N73 | TN3209 |
NUT, nyloc - Flexible mounting to bracketThis item has been superceded by NY606121 - see below |
4 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
4 |
£1.44 Ex VAT @ 20% |
|||
N74 | WP0004 |
WASHER, plain - Flexible mounting to bracket |
4 |
£0.42 Ex VAT @ 20% |
||
N75 | HB0909 |
BOLT - Flexible mounting to chassis frameThis item has been superceded by BH606101 - see below |
4 | |||
BH606101 |
BOLT 3/8 UNF X 1-1/4 INCH |
4 |
£1.36 Ex VAT @ 20% |
|||
N76 | YN2909 |
NUT, nyloc - Flexible mounting to chassis frameThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
N77 | 211505 |
REAR ENGINE PLATE |
1 | |||
N78 | HU0807 |
SCREW, set - Rear engine plate to cylinder blockThis item has been superceded by SH605071 - see below |
7 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
7 |
£0.61 Ex VAT @ 20% |
|||
N79 | WL0208 |
WASHER, lock - Rear engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
ENGINE LIFTING EYES |
||||||
N80 | 123716 |
EYE, lifting, frontRevington TR information: No longer available consider 123716SH |
1 | |||
123716SH |
Second Hand LIFTING EYERevington TR information: Not currently available |
1 |
£31.72 Ex VAT @ 20% |
|||
N81 | 145987 |
EYE, lifting, rearRevington TR information: This lifting eye fitted to TR250, 5 and 6 engines is no longer available new. Order second hand 145987SH |
1 | |||
145987SH |
Second Hand REAR LIFTING EYE 6 CYL |
1 |
£31.72 Ex VAT @ 20% |
|||
N82 | HU0805 |
SCREW, set - Lifting eyes to cylinder blockThis item has been superceded by SH605051 - see below |
4 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
4 |
£1.39 Ex VAT @ 20% |
|||
N83 | WL0208 |
WASHER, lock - Lifting eyes to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
N84 | 121398 |
OIL PRESSURE SWITCHThis item has been superceded by GPS117 - see below |
1 | |||
GPS117 |
OIL PRESSURE SWITCHRevington TR information: Oil pressure switch suitable for TR250, 5, 6-CC, CP and CR. CF TR6 uses GPS113 A high pressure switch is available for those who would prefer earlier warning of impending oil pressure failure. See RTR8353-1 below |
1 |
£11.70 Ex VAT @ 20% |
Also in this listing
Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch