Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CR Plate 20-42 - ENGINE (P.I. MODELS)
<< Return to Triumph Catalogue Plate ListAlso in this listing
Cylinder Head, rocker shaft, valves and Springs, push rods and cam followers. Core PlugsPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
20-42 | 057110 |
NUTThis item has been superceded by 51K1178 - see below |
12 | |||
51K1178 |
LOCKNUT ROCKER ADJ.Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE |
12 |
£0.65 Ex VAT @ 20% |
|||
20-42 | 058923 |
GUIDERevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
6 |
£1.84 Ex VAT @ 20% |
||
20-42 | 101022 |
SCREW SETThis item has been superceded by SH605041 - see below |
1 | |||
SH605041 |
SCREW 5/16 UNF X 1/2 INCH |
1 |
£0.76 Ex VAT @ 20% |
|||
20-42 | 103810 |
NUT CYL HEAD ATTACHMENTRevington TR information: TR250, 5 and 6 standard nut. 7/16"UNF 11/16" AF. For high compression engines use our deeper nut part number NP607162 |
14 |
£4.73 Ex VAT @ 20% |
||
103810SH |
CYLINDER HEAD NUTRevington TR information: TR5-6 standard nut. 7/16"UNF 11/16" AF. For very high compression engines use our deeper nut part number NP607162 |
14 |
£1.45 Ex VAT @ 20% |
|||
20-42 | 104859 |
SCREW |
1 |
£8.39 Ex VAT @ 20% |
||
20-42 | 105123 |
STUDThis item has been superceded by ST605331 - see below |
3 | |||
ST605331 |
STUD 5/16 X 4-1/8" UNF+ UNF |
3 |
£6.41 Ex VAT @ 20% |
|||
20-42 | 105124 |
STUDThis item has been superceded by ST606111 - see below |
4 | |||
ST606111 |
STUD 3/8 X 1-3/8" UNF+ UNF |
4 |
£1.55 Ex VAT @ 20% |
|||
20-42 | 105125 |
STUDThis item has been superceded by ST606141 - see below |
6 | |||
ST606141 |
STUD 3/8 X 1-3/4" UNF+ UNF |
6 |
£1.96 Ex VAT @ 20% |
|||
20-42 | 106663 |
CONE SPLITRevington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
12 |
£4.03 Ex VAT @ 20% |
||
106663SH |
Second Hand VALVE COLLET 4 CYL. |
12 |
£5.11 Ex VAT @ 20% |
|||
20-42 | 109023 |
ROCKER NOIThis item has been superceded by 139897 - see below |
1 | |||
139897 |
ROCKER No.1 TR260, 5, 6 2500 etcRevington TR information: Rocker No1, 6 Cylinder, Consider original second hand part number 139897SH All TR250, 5 and TR6 used the same Rocker Arms part number 109023 for number 1 and 109024 for number 2 and of course all... READ MORE |
1 |
£51.85 Ex VAT @ 20% |
|||
20-42 | 109024 |
ROCKER NO2This item has been superceded by 139896 - see below |
1 | |||
139896 |
ROCKER No.2 genuine BL TR250, 5, 6Revington TR information: Rocker No2, 6 Cylinder, original Leyland Packaged. Our stock are genuine Leyland parts. Consider original second hand part number 139896SH All TR250, 5 and TR6 used the same Rocker Arms part number 109023 for number 1... READ MORE |
1 |
£51.85 Ex VAT @ 20% |
|||
20-42 | 109495 |
BALL PINRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle.
In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
12 |
£7.02 Ex VAT @ 20% |
||
109495SH |
Second Hand ROCKER ADJ SCREW TR2-6Revington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
12 |
£3.85 Ex VAT @ 20% |
|||
20-42 | 111456 |
STUDThis item has been superceded by ST605141 - see below |
3 | |||
ST605141 |
STUD 5/16 X 1-3/4" UNF+ UNF |
3 |
£3.46 Ex VAT @ 20% |
|||
20-42 | 111869 |
VALVE GUIDERevington TR information: Standard steel exhaust Valve Guide fitted to TR250, 5 and 6. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an outside diameter of 0.5025" (12.76mm). The guide is 2.25" long The... READ MORE |
6 |
£5.28 Ex VAT @ 20% |
||
20-42 | 111870 |
COLLAK VALVERevington TR information: These inlet valve spring upper collars (caps) were used on all versions of TR250, TR5-TR6. RTR prefer to supply second hand part 111870SH or aluminium version RTR1180 which are guaranteed to be dimensionaly correct. See part... READ MORE |
6 |
£5.17 Ex VAT @ 20% |
||
111870SH |
Second Hand INLET VALVE CAP 6 CYLRevington TR information: Second Hand inlet valve spring upper collars (caps) used on all versions of TR250, TR5-TR6. RTR prefer to supply this second hand part 111870SH or aluminium version RTR1180 which are guaranteed to be dimensionaly correct. See... READ MORE |
6 |
£4.58 Ex VAT @ 20% |
|||
20-42 | 114774 |
PLUGRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
114774SH |
Second Hand DRAIN Plug ENG/AXLE SQ TR2-6Revington TR information: Second hand Plug. The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using... READ MORE |
1 |
£3.52 Ex VAT @ 20% |
|||
20-42 | 128334 |
VALVE INNER COLLARRevington TR information: These exhaust valve spring upper inner collars (caps) were used on all versions of TR250, TR5 and TR6. These collars are not available new; use second hand part 128334SH or inlet version 111870 or aluminium... READ MORE |
6 | |||
128334SH |
EX/VALVE CAP INNER |
6 |
£3.29 Ex VAT @ 20% |
|||
20-42 | 128335 |
VALVE OUTER COLLARRevington TR information: These exhaust valve spring upper outer collars (caps) were used on all versions of TR250, TR5 and TR6. Consider second hand part 128335SH or inlet version 111870 or aluminium version RTR1180. See part number RTR1180 for... READ MORE |
6 |
£4.14 Ex VAT @ 20% |
||
128335SH |
Second Hand EX/VALVE CAP OUTER |
6 |
£1.90 Ex VAT @ 20% |
|||
20-42 | 132495 |
STUD ROCKER PEDESTALThis item has been superceded by ST606241 - see below |
6 | |||
ST606241 |
STUD 3/8 X 3" UNF+ UNF |
6 |
£5.21 Ex VAT @ 20% |
|||
20-42 | 137811 |
PLUG |
2 | |||
20-42 | 143552 |
VALVE TAPPETRevington TR information: Consider using our improved cam follower RTR1298. |
1 |
£12.35 Ex VAT @ 20% |
||
20-42 | 144648 |
PLUG CORE |
1 |
£2.29 Ex VAT @ 20% |
||
20-42 | 144686 |
PLUG CORE |
1 |
£3.71 Ex VAT @ 20% |
||
20-42 | 145867 |
PEDESTAL No.1Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£20.71 Ex VAT @ 20% |
||
145867SH |
Second Hand PEDESTAL UNDRILLED TR5-6 NO.1Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£17.86 Ex VAT @ 20% |
|||
20-42 | 144974 |
PEDESTAL INTERMEDIATERevington TR information: Number 2, 3, 4, 5 pedestal TR250, 5, 6 and Spitfire 1500 For reference to TR owners, the same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one... READ MORE |
4 | |||
20-42 | 145869 |
PEDESTAL No.6Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£30.60 Ex VAT @ 20% |
||
145869SH |
Second Hand PEDESTAL DRILLED TR5-6 NO.6Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE |
1 |
£17.86 Ex VAT @ 20% |
|||
20-42 | 146128 |
VALVE INLETRevington TR information: head dia 36.51mm . RTR1129 is our stainless steel gas flowed version. |
6 |
£13.28 Ex VAT @ 20% |
||
20-42 | 148916 |
PUSH RODRevington TR information: Standard TR250, TR6carb and CRTR6 push rod.
NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression.
Part number 149513 is used in... READ MORE |
12 | |||
148916SH |
Second Hand ROD TR250/6CARBRevington TR information: Second Hand Standard TR250, TR6carb and CRTR6 push rod. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is... READ MORE |
12 |
£5.11 Ex VAT @ 20% |
|||
20-42 | 105322 |
SPRING ROCKERThis item has been superceded by WT10914 - see below |
2 | |||
WT10914 |
WASHER THACKERY 9/16 INCH |
2 |
£0.70 Ex VAT @ 20% |
|||
20-42 | 157229 |
VALVE SPRINGRevington TR information: This valve spring is suitable for TR6PI and carb engine numbers CC75000 to 75737 and CP75001 to 77718 when used without an inner spring and TR6PI and carb CR1 and CF1 onwards when used with inner... READ MORE |
12 |
£3.84 Ex VAT @ 20% |
||
20-42 | 157476 |
INNER VALVE SPRINGRevington TR information: This inner valve spring is suitable for TR6PI and carb CR1 and CF1 onwards when used with outer valve spring 157229 on all valves. Consider spring sets RTR1176 and RTR1177 |
12 |
£3.29 Ex VAT @ 20% |
||
20-42 | 157509 |
SPRING COLLAR LOWER 7mm THICKRevington TR information: TR6PI and carb cars CR1 and CF1 onwards. This collar is 7mm thick with an outside diameter of 19mm and supports the inner valve spring only. a thinner collar 149717 is also available as are second... READ MORE |
12 |
£4.38 Ex VAT @ 20% |
||
157509SH |
Second Hand SPRING COLLAR LOWER 7mm THICK |
12 |
£3.56 Ex VAT @ 20% |
|||
20-42 | 159873 |
EXHAUST VALVE |
6 |
£15.10 Ex VAT @ 20% |
||
20-42 | 159903 |
INSERT VALVE SEAT INLET |
6 |
£6.73 Ex VAT @ 20% |
||
20-42 | 159904 |
INSERT VALUE SEAT EXHAUST |
6 |
£9.66 Ex VAT @ 20% |
||
20-42 | 214559 |
ROCKER SHAFTRevington TR information: This Rocker Shaft is to the original equipment standard. Consider RTR1187 which is the tuftrided version used for our exchange rocker shaft. Remember to install a plug 137811 at either end of the rocker shaft before... READ MORE |
1 |
£35.98 Ex VAT @ 20% |
||
20-42 | 500469 |
WASHERThis item has been superceded by WC10508038 - see below |
1 | |||
WC10508038 |
WASHER COPPER 5/16 I/D X 1/2 O/D X 0.040" |
1 | ||||
20-42 | 508289 |
WASHER SPECIAL |
14 |
£0.94 Ex VAT @ 20% |
||
20-42 | DS3113 |
ROLL PIN 5/16 X 3/4 INCHThis item has been superceded by RPS2012 - see below |
2 | |||
RPS2012 |
ROLLPIN 5/16 x 3/4 |
2 |
£4.14 Ex VAT @ 20% |
|||
20-42 | HN2008 |
NUT PLAIN 5/16 UNFThis item has been superceded by NP605081 - see below |
3 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
3 |
£0.17 Ex VAT @ 20% |
|||
20-42 | HN2009 |
NUT PLAIN 3/8 UNF X 11/32" (STD)This item has been superceded by NP606111 - see below |
6 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
6 |
£0.14 Ex VAT @ 20% |
|||
20-42 | PC10 |
PIN SPLIT 3/32 X 7/8"This item has been superceded by PS106071 - see below |
1 | |||
PS106071 |
PIN SPLIT 3/32" X 7/8" |
1 |
£0.54 Ex VAT @ 20% |
|||
20-42 | WM813 |
WASHER PLAIN 1/2 X 1-1/8 INCH ODThis item has been superceded by WP10818093 - see below |
4 | |||
WP10818093 |
WASHER PLAIN 1/2 X 1-1/8 INCH OD |
4 |
£0.58 Ex VAT @ 20% |
|||
20-42 | WP184 |
WASHER PLAIN 3/8 X 3/4 TABLE3Triumph Catalogue Remarks: use WP009 instead of this plain washer |
6 | |||
WP10612075 |
WASHER PLAIN 3/8 X 3/4 TABLE3Revington TR information: Washer Plain stands Table 3. in applications where a hardened washer is needed (rocker pedestal attachment for instance) us WP009 |
6 |
£0.42 Ex VAT @ 20% |
Also in this listing
Cylinder Head, rocker shaft, valves and Springs, push rods and cam followers. Core Plugs